The core of this new and innovative shock is the unique and rebound valving system and an advanced compression phase of the shock absorber. This proprietary process will elevate the overall handling and performance of your vehicle on and off-road. gas pressurized shock has a variety of advantages including minimizing air-to-oil mixture that can cause foaming and shock fade. Gas pressurization also provides a mild boost of spring rate to the vehicle. This shock absorber features a 2.36 inch diameter shock body. A larger shock body allows for increased fluid capacity to operate cooler and to increase vehicle control and performance at varying speeds and terrains. This shock absorber combines a larger shock body with all-weather fluid, allowing the shock to withstand internal temperatures between -40 and 248 degrees Fahrenheit. At lower speeds or in the earlier stages of the shock’s travel, an eccentric disc in the valve shim stacks will engage the valving at lower frequencies, helping to control the energy of motion as the cycle of the shock increases or decreases in its action. When hitting a pothole, off-road trail obstacle or similar activity, the shock absorber Progressive Engagement Valving allows for early flow of fluid, helping to reduce harsh initial impacts and to control the flow of fluid in a progressive, gradual manner through the valving. During on- or off-road driving activities like wash boarding or when travelling a rough fire road, the early flow of fluid helps to minimize a “rough” ride as the piston movement is able to glide through the initial travel motion of the shock with minimal ground impact or force. If needed, the Progressive Engagement Valving will further engage to maintain control and stability.
Name: JK Shock Absorber
Installation: Original Installation
High & low Adjustable: Yes
Soft & Hard Adjustable: Yes
Warranty: 12 Months
NOTICE OF REPLACEMENT OF SHOCK ABSORBER
1.When installing a new shock absorber, you should pay attention to whether the models match, and at the same time, confirm whether the left and right sides are correct.
2.Check the quality of the new shock absorber, if there is oil leakage in the appearance, there should be no bumps on the surface of the shock absorber
3.Use the delivered installation tools during the installation process, and do not force the installation of the shock absorber to avoid damage.
4.When installing, check whether the position between the shock absorber and the vehicle is correct
5.During the installation process, protect the surface of the shock absorber to avoid accidentally scratching the shock absorber with tools, otherwise it will cause the shock absorber to leak oil.